MAZDA BT50 2021 ONWARDS WITH ISUZU ENGINE

BASH PLATE SET in Silver

This Bash Plate set is Extra Heavy Duty made from 4mm Mild Steel with slots

What you get

• 1 only Silver 4mm Front and Back Bash Plate Set
• Actual images of the item are shown in the listing.
• Solid & Full Protection up to the gearbox
• Mounting Bolts were needed to get your bash plate fitted on the weekend.
• Extremely easy to fit with installation Instructions (it will take 15 Minutes)
• We will dispatch the item in 1 to 2 days and deliver it to your door.
• Packaged properly and sent as fast as we can.
• This Bash Plate is made in Australia and supported in Australia not overseas.
• All the supplied items are new and mount directly onto the chassis (no thin 3mm brackets are used)

Off-road driving can be hard on your vehicle. To avoid any damage, the underside of your 4x4 needs protection.

The thump or crunching sound made when the underside of your 4x4 meets the ground is never pleasant, especially if you have not equipped your vehicle with adequate underbody protection. There are several exposed and vulnerable components underneath any 4x4 that can be damaged when driving off-road, some of which can affect the way the vehicle drives and others that can render you stranded.

The best way to protect the underside of your 4x4 is with a Bash Plate.

Bash plates/Skid Plates

Some protection is supplied on your 4x4 and resembles a bash/skid plate, but these items are usually a plastic splash guard or a piece of thin mild steel that will bend as soon as it hits a rock. Components that need protection include the engine sump transmission, and the transfer case. Some now have electronic steering imagine damaging that. Condensers, Radiators are a must to protect and some bash plate suppliers look towards the look of a bash plate more than the actual protection it is to provide. Cooling holes are also important as “Air Flow” must not be constricted.

We provide “Gorilla Strong” Bash plates. All our bash plates are made from 4mm Australian Steel. Our Bash Plates are designed to cover the most vulnerable areas with maximum front ground clearances. We supply SHC cap screws. Our bash plates have holes or slots in the right places for cooling the engine and components. We aim to cover Radiators/Condensers where we can. The bash plates we provide in Black or Silver are painted with 98.5% Industrial Grade Galvanised Metal Primer and can be repainted or repaired unlike powder coated surfaces. We provide Bull Bar Type and Non-Bull bar type for most models, but unfortunately cannot adapt to the many different Bull-Bars that are on market. A simple customised plate can usually fix this problem.

Payments

• The Preferred payment should be made via Paypal.
• Direct Deposit or bank transfers can also be made, please contact us.

Shipping

• We will send the product within one or two days.
• We will assign a courier to move the product directly to your door with Authority to leave the product (ALT) if you are not home, please allow 5 to 6 days for delivery in normal circumstances
• Difficult places and regional please allow up to 10 days.
• We cannot send this large and heavy product to a PO Box.

Returns

• We recommend professional installation. If the product is damaged during installation, we are not responsible and will not issue a refund. All returns must be made prior to 30 days. Returns will not be accepted after 30 days.
• Before any returns or exchanges are wanted, please contact us and reason for return/exchange.
• Please inspect your product for any defects or shipping damage prior to installation, contact us if there is any damage. Take photos of the shipping damage or packaging damage and send it to us. If the packaging is damaged it is likely the product is also due to the weight of the product
• If you have changed your mind or ordered the wrong model and wish to return it, the buyer must pay for postage costs.
• If a return needs to be issued, please contact us via messages only.

Please note: The Product produced in this listing has no affiliation with the Car Maker Mazda, it is purely a product to help and benefit the customer for full underside protection in safety and functionality.

BT50 in the diagrams are for understanding the original equipment product only.