We produce Retaining Wall Posts. These posts are spot welded and cold Galv Treated and 1200 long.

The idea of the post is simple. Hardwood Sleepers are dropped into the posts at 2400 long. Three are above ground level at 200mm wide each (if you want 600mm) If set at a slight angle retain as much dirt as you wish. The manufactured posts are cheaper than buying channel. Buying channel also does not give you LH or RH posts. All posts are the same price we weld them together. There is a Centre strap also made of 3mm Galv that keeps the sleepers together, it is on another listing. This method is cheaper than Concrete Sleepers produced by others. You can treat the (Recommended) Hardwood sleeper with old diesel oil. You can use treated pine sleepers if you wish but they will last about two years depending on your location. We recommend half the post going into the concrete. Once your posts are in it's easy to complete the wall. As seen in the pictures.

It is recommended to stay below the council requirements. We have tried larger sections as per pictures and have been successful but recommend no more than 800mm or four sleepers up. Please look at the pictures and understand the concept. Contact us if you have any interest with the amount of RH/LH and straight posts. To finish the wall, we use one channel or weld it to a 75mm post. Email us with your requirements. If you're clever with an Arc Welder, you can make your own security fence as in the last 2 Pictures. Just bolt, screw some pool fencing on top of the hardwood sleepers. The post we sell were cut in half.

We can transport these anywhere for you but the cost depends on how many.