THE ULTIMATE "TUFF" BASH PLATE SET

Will Suit and Fit Isuzu DMax 2021 3rd Generation Onwards, will fit with most bull bars

This Bash Plate set is made up of 3 pieces Cooling Front Plate 1, Centre Engine Plate 2, & Transmission Plate 3

TOUGH BERINGIE (R) PRODUCT

Auto Transmission or Manual Transmission

THE ULTIMATE BASH PLATE SET IN 6mm Aluminum this is by far our best product

This product is not standard Aluminum it's tougher and stronger "Marine Grade Ally"

It is stronger than steel. It is lighter than steel.

It will not rust. It can be painted any color if you wish.

NO SHARP EDGES ON THE PRODUCT.

Exclusive to 311ONLINE ONLY "beware of imitations"

Refer to pictures for more details

limited time only be quick

It weighs only 15.5KG in Total

What you get

• 3 x 6mm Ally Bash Plates Plate 1,2,3.
• Actual images of the item are shown in all the listing phots
• Solid & Full Protection including the gearbox/Auto
• Socket Head Mounting Bolts were needed to get your bash plate fitted on the weekend.
• Extremely easy to fit with installation Instructions.
• We will dispatch the item in 1 to 2 days and deliver it to your door.
• Packaged properly and sent as fast as we can.
• This Bash Plate is made in Australia and supported in Australia not overseas.
• All the supplied items are new and mount directly onto the chassis (no thin 3mm brackets are used)
• Maintenance Free as this item will not ever rust
• Will fit Manual or Auto transmission

Off-road driving can be hard on your vehicle. To avoid any damage, the underside of your 4x4 needs protection.

The thump or crunching sound made when the underside of your 4x4 meets the ground is never pleasant, especially if you have not equipped your vehicle with adequate underbody protection. There are several exposed and vulnerable components underneath any 4x4 that can be damaged when driving off-road, some of which can affect the way the vehicle drives and others that can render you stranded.

The best way to protect the underside of your 4x4 is with a Bash Plate.

Bash plates/Skid Plates

Some protection is supplied on your 4x4 and resembles a bash/skid plate, but these items are usually a plastic splash guard or a piece of thin mild steel that will bend as soon as it hits a rock. Components that need protection include the engine sump, transmission, and the transfer case. Some now have electronic steering imagine damaging that. Condensers, Radiators are necessary to protect, and some bash plate suppliers look towards the look of a bash plate more than the actual protection it is to provide. Cooling holes are also important as “Air Flow” must not be constricted.

We provide Beringei (R) “Gorilla Strong” Bash plates. All our bash plates are made from Australian Raw Materials. Our Bash Plates are designed to cover the most vulnerable areas with maximum front ground clearances. We supply flush mount cap screws. Our bash plates have holes or slots in the right places for cooling the engine and components. We aim to cover Radiators/Condensers where we can. We provide Bull Bar Type and Non-Bull bar type for most models but unfortunately cannot adapt to the many different Bull-Bars that are on the market. A simple customised plate can usually fix this problem.

Payments

• The Preferred payment should be made via Paypal.
• Direct Deposit or bank transfers can also be made, please contact us.

Shipping

• We will send the product within one or two days.
• We will assign a courier to move the product directly to your door with Authority to leave the product (ALT) if you are not home, please allow 5 to 6 days for delivery
• Difficult places and regional please allow up to 10 days.
• We cannot send this large and heavy product to a PO Box.

Returns

• We recommend professional installation. If the product is damaged during installation, we are not responsible and will not issue a refund. All returns must be made prior to 30 days. Returns will not be accepted after 30 days.
• Before any returns or exchanges are wanted, please contact us and reason for return/exchange.
• Please inspect your product for any defects or shipping damage prior to installation, contact us if there is any damage. Take photos of the shipping damage or packaging damage and send it to us. If the packaging is damaged it is likely the product is also due to the weight of the product
• If you have changed your mind or ordered the wrong model and wish to return it, the buyer must pay for postage costs.
• If a return needs to be issued, please contact us by email

Please note: The Product produced in this listing has no affiliation with the Car Maker Isuzu, it is purely a product to help and benefit the customer for full underside protection in safety and functionality.